@rakwireless/pn532 1.0.0

A Node-RED node providing access to PN532 to read UID of RFID card.

npm install @rakwireless/pn532

@rakwireless/pn532-i2c

A node-red node providing access to PN532 to read UID of RFID card.

Install from Node-RED

From within NodeRED, visit the top right menu, select Manage palette and then the Install tab. Look for @rakwireless/pn532-i2c and install it.

Manual installation (development)

Please install @rakwireless/pn532-i2c node with the following commands. If you use docker of Node-RED, you may need to replace ~/.node-red with /usr/src/node-red.

git clone https://github.com/RAKWireless/node-red-nodes.git

cp -rf node-red-nodes/node-red-contrib-pn532-i2c ~/.node-red/node_modules

cd ~/.node-red/node_modules/node-red-contrib-pn532-i2c && npm install

Tips: After @rakwireless/pn532-i2c being installed, Node-RED should be restarted, otherwise, the node cannot be found on the page.

Usage

To get UID of RFID card from PN532 you just need to select the correct settings for your device and trigger the node.

• Name

  Define the msg name if you wish to change the name displayed on the node.

• /dev/i2c-?

  Default I2C Bus is 1. 1 is for '/dev/i2c-1'.

• i2c_Address

  The Address for pn532 is 0x24 which can not be changed.

Example

rak13600-nfc-read - Read NFC tag information by rak13600.

License

This project is licensed under MIT license.