@marcel-domke/node-red-contrib-reolink 1.4.0
A unofficial Node-RED node for receiving real-time data and controlling your Reolink camera.
Reolink Integration for Node-RED
An unofficial Node-RED integration for Reolink cameras that allows you to receive motion detection and AI events, trigger alarms, and control the integrated LED or siren.
Usage
Configuration Node
The Reolink Device node allows you to configure the connection to your Reolink camera and share it between the nodes.
Nodes
Reolink AI Event Node
This node queries the AI events from the Reolink camera (e.g., person recognition, vehicle detection).Reolink Motion Detection Node
This node receives motion detection events from the camera.Reolink Alarm Node
This node triggers an alarm on the camera.Reolink Siren Node
This node controls and monitors the state of the audio alarm (siren) on the camera. If activated the siren will sound when motion is detected.Reolink LED Control Node
This node controls the white LED light of the camera and queries its status.Reolink PTZ Patrol Node
This node allows you to control the PTZ (Pan-Tilt-Zoom) patrol function on a Reolink device. When activated, the camera will follow a pre-configured patrol pattern.Reolink PTZ Preset Node
This node controls and queries the PTZ (Pan-Tilt-Zoom) preset positions on a Reolink device. You can either set the camera to a specific preset position or retrieve a list of available preset positions from the device.Reolink IR Light Node
This node allows you to control and monitor the mode of the IR (infrared) LED light on a Reolink device.
Compatibility
Tested with the following Reolink cameras:
- Reolink RLC-823S2
- Reolink RLC-1224A
- Reolink CX410
But this integration should work with all Reolink cameras that support the HTTP / HTTPS API.
License
This project is licensed under the Apache 2.0 License. See the LICENSE file for details.
