@captica/node-red-systacomfort2 1.0.2
Node-RED node to connect and read data from SystaComfort II heating/solar systems
captica: Node-RED Node for SystaComfort II
Receive data from SystaComfort II devices in Node-RED flows
This Node-RED node is capturing the packets from a SystaComfort II device and prepares the data for further processing.
Supported values
| Value-Key | Topic | Description |
|---|---|---|
| BOILER_START_COUNTER | boiler/starts/get | Starts of boiler gas unit |
| BOILER_WORKING_HOURS | boiler/workinghours/get | Overall working hours of boiler |
| BUFFER_TANK_TEMPERATURE_TOP | buffer/temperature-top/get | Top temperature of buffer tank |
| BUFFER_TANK_TEMPERATURE_BOTTOM | buffer/temperature-bottom/get | Bottom temperature of buffer tank |
| SOLAR_YIELD_CURRENT | solar/yield-current/get | Current yield of solar |
| SOLAR_YIELD_DAY | solar/yield-day/get | Day yield of solar |
| SOLAR_YIELD_TOTAL | solar/yield-total/get | Total yield of solar |
| SOLAR_TEMPERATURE_COLLECTOR | solar/temperature-collector/get | Current temperature of solar collector |
| SYSTEM_TEMPERATURE_FLOW | system/temperature-flow/get | Current temperature of system flow |
| SYSTEM_TEMPERATURE_FLOW_RETURN | system/temperature-flowreturn/get | Current temperature of system flow (return) |
| SYSTEM_TEMPERATURE_EXTERNAL | system/temperature-external/get | External temperature of system |
| SYSTEM_TEMPERATURE_PROCESS_WATER_CURRENT | system/temperature-processwater-current/get | Current temperature of system process water |
| SYSTEM_TEMPERATURE_PROCESS_WATER_TARGET | system/temperature-processwater-target/get | Target temperature of system process water |
| SYSTEM_TEMPERATURE_ROOM_TARGET | system/temperature-room-target/get | Target room temperature |
Compatible SystaComfort II devices
| Device | Software-Version | Hardware-Version | Basis-System | Compatible? |
|---|---|---|---|---|
| SystaComfort II | V1.16 | V1.21 | V1.13 | yes - except SYSTEM_TEMPERATURE_FLOW_RETURN is not available |
Node Parameters
| Parameter | Description |
|---|---|
| Name | Name of node on flow |
| Topic Prefix | Prefix will be added to topic property on output message payload |
| Listen Port | Port of UDP Server to listen on. Useful on multiple devices |
Connectivity
To capture the published data from your SystaComfort II device you have to redirect the traffic on your local network. If you have a local DNS Forwarder you can just create a static host override. The domain pradigma.remoteportal.de needs to be resolved to your internal Node-RED ip address.
